Everything that we do starts with the material, and SPI's plate is guaranteed to perform for your project.

HRAP MILL SPECS

This table lists the general industry standard specifications for Hot Rolled Annealed and Picked (HRAP) stainless plate.

Gauge lb/sq ft lb/sq in Flatness Tolerance Gauge Tolerance
72" wide 96" wide 72" wide 96" wide
3/16 0.1875 8.579 0.05958 1.375" 1.625" +.045" -.010" +.050" -.010
7/32 0.2187 9.870 0.06854
1/4 0.2500 11.162 0.07750 1.125" 1.438"
5/16 0.3125 13.746 0.09546
3/8 0.3750 16.496 0.11456 0.750" 1.125" +.055" -.010" +.060" -.010
7/16 0.4375 19.080 0.13250
1/2 0.5000 21.633 0.15044 0.625" 1.125"
9/16 0.5625 24.247 0.16838
5/8 0.6250 26.831 0.18633
11/16 0.6875 29.415 0.20427
3/4 0.7500 32.123 0.22308 0.625" 0.813" +.060" -.010" +.065" -.010
13/16 0.8125 34.707 0.24102
7/8 0.8750 37.291 0.25897
15/16 0.9375 39.875 0.27691
1 1.0000 42.665 0.29628 0.563" 0.688" +.070" -.010" +.075" - .010"
1-1/8 1.1250 47.833 0.33217
1-1/4 1.2500 53.001 0.36806
1-3/8 1.3750 58.169 0.40395
1-1/2 1.5000 63.337 0.43984 0.500" 0.750"
1-3/4 1.7500 73.672 0.51161
2 2.0000 84.008 0.58339 +.125" -.010" +.150" -.010
2-1/8 2.1250 89.610 0.62229
2-1/4 2.2500 94.777 0.65817
2-1/2 2.5000 105.113 0.72995
2-3/4 2.7500 115.449 0.80173
3 3.0000 126.301 0.87709 +.175" -.010 +.210" -.010"
3-1/2 3.5000 146.972 1.02064
3-3/4 3.7500 157.308 1.09242
4 4.0000 168.264 1.16850 0.625" 0.938" +.250" -.010 +.300" -.010"

 

Not Sure Where to Start? Call (800)345-8126 or, Contact Us

Stainless Plate Products, Inc.
Stainless Processing, Inc.
1255 Manor Road, Coatesville, PA 19320
Phone: (800)345-8126 ■ (610)384-1278
Fax: (610)384-7362

Subscribe to our Newsletter SUBSCRIBE to our Newsletter
Subscribe to our Newsletter
DOWNLOAD our Company Brochure

Copyright © 2017
Stainless Processing, Inc.
All rights reserved.